某高硫矽卡岩型金铜矿选矿试验研究

针对高硫矽卡岩金铜矿中黄铁矿含量高、难抑制特点,采用对黄铁矿捕收能力非常弱的Z-200和丁基铵黑药作为浮选捕收剂,在低碱度条件下(pH值9.5)实现了铜与金的综合回收。研究结果表明:闭路试验混合精矿铜品位为21.15%、金品位为24.11g/t,铜和金的回收率分别可达93.92%和83.73%,选矿指标较为理想。     

Investigation on the effectiveness of the repair method 8.3 “Corrosion protection by increasing the electrical resistivity” in chloride-containing concrete Part 2: Chloride redistribution in concrete after application of a system sealing surface protective coating

This DFG-funded research project aimed to gain a better understanding of the mechanisms of the W-Cl repair principle within the framework of fundamental investigations, to contribute to the creation of the necessary basis for a broader application of the repair principle in practice. The focus was on the development of a model to describe the chloride redistribution after the application of a system sealing surface protective coating. On the basis of Fick's second law of diffusion, a mathematical model with a self-contained analytical solution was developed, with the help of which the chloride redistribution after application of a system sealing surface protective coating can be calculated under the idealized assumption of complete water saturation of the concrete. Furthermore, the influence of the dehydration of the concrete, expected as a result of the application of the repair principle W-Cl, on the chloride redistribution was investigated. On the basis of laboratory tests and numerical simulations, material-specific reduction functions were developed to quantify the relationship between the chloride diffusion coefficient and the ambient humidity.     

安徽省铜陵市铁山头铜矿床地质特征及找矿潜力

铁山头铜矿床处于铜陵矿集区的中东部，属于扬子陆块下扬子凹陷中的铜陵隆起。矿床位于凤凰山矿田北侧，成矿潜力较大。综合研究分析认为：①接触交代作用使得岩体接触带及附近变质形成矽卡岩矿化带；②区内凤凰山岩体（花岗闪长岩）系成矿母岩；③矿体主要赋存于花岗闪长岩与三叠系下统南陵湖组石灰岩接触带上；④矿床成因类型为高—中温热液交代矽卡岩型矿床。     

Measurement of residual stresses in dissimilar friction stir-welded aluminium and copper plates using the contour method

The longitudinal residual stresses in the friction stir-welded plates of 5A06 aluminium and pure copper were determined using the contour method. The results revealed the presence of high tensile and compressive residual stresses on the aluminium and copper sides, respectively. The residual stresses were detected on the weld zone as well as the thermo-mechanically affected zone (TMAZ) of the aluminium plate. In contrast, the compressive residual stresses in the copper plate had a much narrower width along the weld line. Peak tensile stresses up to 240?MPa were found in the TMAZ of the aluminium plate.     

Cf/C复合材料与纯铜的胶接辅助钎焊连接

采用胶接辅助钎焊方法,以TiH_2粉为活性元素源,环氧树脂为粘性载体,Ag-Cu共晶合金为钎料,Cu箔为应力缓冲层材料,实现了C_f/C复合材料与纯铜的钎焊连接,结果表明,接头界面处产生TiC,TiCu,Ag(s,s),Cu(s,s)等反应产物,其结构可表示为(C_f/C)/TiC+Ag(s,s)+Cu(s,s)+TiCu/Cu。通过钎焊工艺试验得出,在930℃保温25 min钎焊条件下接头的抗剪强度达到最大值30 MPa。     

Thermal stability of CaCu3Ti4O12: Simultaneous thermal analysis and high-temperature mass spectrometric study

Thermal stability of calcium copper titanate was studied by differential scanning calorimetry, thermogravimetry and high-temperature mass spectrometry. Calcium copper titanate (CCTO) had no thermal effects and mass losses caused by thermal dissociation or any phase transitions, besides melting, in the temperature range of 298–1423?K. The melting point of calcium copper titanate is 1398?K. The endothermic effect at 1250?K was associated with the decomposition of copper (II) oxide segregated in the intergrain space of the CaCu₃Ti₄O₁₂-CuO ceramics. In this connection, we proposed a simple method for estimating the content of copper oxide in the CaCu₃Ti₄O₁₂-CuO composite. The processes of evaporation of CaCu₃Ti₄O₁₂ in the temperature range of 1500–2100?K were studied by high-temperature mass spectrometry. In the temperature range of 1500–1750?K, easily volatilized copper oxide was evaporated selectively from the calcium copper titanate. At the temperature of 2100?K, atomic calcium and titanium oxides, TiO and TiO₂, were present in the vapor.     

Numerical study of flow distribution uniformity for the optimization of gradient porosity configuration of porous copper fiber sintered felt for hydrogen production through methanol steam reforming micro-reactor

A macroscopic numerical method is proposed to study the flow distribution uniformity of a novel porous copper fiber sintered felt (PCFSF), which has gradient porosities and was developed as the methanol steam reforming micro-reactor catalyst support for hydrogen production for fuel cell applications. The macroscopic porous media developed by the ANSYS/FLUENT software is used to represent the PCFSF. Our results indicate that the gradient porosity can reshape the flow distribution of PCFSFs greatly, thus producing significant influence on their performance. It is further revealed that, for a PCFSF with a determined gradient porosity configuration but different reactant feed directions, the velocity uniformity can be used as a quantitative criterion to evaluate the performance of hydrogen production. Furthermore, new gradient PCFSFs are produced according to the flow distribution of original gradient PCFSFs. The preliminary experimental results of the new gradient PCFSFs of 0.8-0.9-0.7 and 0.7-0.9-0.8 exhibit better methanol conversion and H₂ flow rate. This indicates that the numerical method can be used for the optimization of PCFSFs' gradient porosity configuration, which consists of the shape and position of the interfaces between different porosity portions, the number of interfaces and the porosity distribution in different portions.     

TG-FTIR and Py-GC/MS study of the pyrolysis mechanism and composition of volatiles from flash pyrolysis of PVC

To facilitate the reuse and recycling of polyvinyl chloride (PVC) to achieve sustainable development and new industrialization, the composition and mechanism of formation of volatiles during the flash pyrolysis of PVC were studied by thermogravimetry-Fourier transform infrared (TG-FTIR) and pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS). TG and derivative thermogravimetry (DTG) analyses indicated two main degradation stages during flash pyrolysis of PVC, namely dehydrochlorination of PVC and decomposition of dechlorinated-PVC. Simultaneously, the FTIR results revealed that the main functional groups in the pyrolysis process were H–Cl, -C-Cl, C–H, CH, and aromatic groups. The relative content of main volatiles was determined by Py-GC/MS, and decreased in the following order: aromatics > alkenes > hydrogen chloride (HCl) > chlorinated hydrocarbons. Specifically, the relative content of aromatics was as high as 76.790–81.809%, while that of HCl was in the range of 3.016–3.096%. The carbon number distribution and the relative content of main products obtained from the flash pyrolysis of PVC at different final temperatures were also analysed. According to the experimental results, the mechanism of formation of the main volatiles based on free-radical reactions was deduced in detail. Therefore, this study provides further details for deepening the understanding of the PVC pyrolysis process.     

氯化氢过氯原因及预防措施

分析了合成氯化氢中游离氯含量超标的原因,为避免发生安全生产事故,提出了预防措施。